Guru-Z Remote Control http://www.guru-z.com/forum/ | |
FP Belt Drive Converstoin Questions http://www.guru-z.com/forum/viewtopic.php?f=2&t=7 |
Page 1 of 1 |
Author: | thelawman01 [ Thu Jan 14, 2010 12:22 pm ] |
Post subject: | FP Belt Drive Converstoin Questions |
Hello all, I am new to the forum. I currently have a Honey Bee FP V3 with a Neon series Guru-Z frame. I am considering either converting the HBFP to belt drive tail or building a custom fixed pitch from the ground up. I did notice also that Guru-Z no has the 3mm collective head. I have also considered creating a ground up custom micro collective pitch. Bring on the suggestions. I would also like to see examples from everyone's builds. And, if you don't mind, could you tell me the process required to convert to the belt drive if I convert the HBFP. Thanks, Joe |
Author: | vlaporte [ Wed Jan 20, 2010 7:40 am ] |
Post subject: | Re: FP Belt Drive Converstoin Questions |
Joe, I have a HoneyBeeFP and built a Guru Neon frame, added 12mm belt tail kit, added Telebee gyro, added [GE38H]3900kV Brushless motor and ESC. I also use Xtreme fiber blades that are shortened by one inch on each end. It flies great. It was lots of fun gradually adding modifacations. I would not build a collective pitch on this setup. I am beginning to build an EXI-250 collcetive heli. It has much better head gear and is a stronger machine than anything from Guru. have Fun, Vince |
Author: | thelawman01 [ Wed Jan 20, 2010 8:14 am ] |
Post subject: | Re: FP Belt Drive Converstoin Questions |
Thanks Vince, I did see the EXI 250 kit and am considering building a 250 and 450 identical to each other. Just something fun I guess. Did you get a new receiver for your HoneyBee or did you remap the HBFP receiver? I noticed on mine that it actually has 6 channels on the receiver but I'm sure it isn't mapped to use it for what I want to do. Sounds like you have a couple pretty cool helis there. Do you have any pics or vids of them? Thanks, Joe |
Author: | vlaporte [ Sun Jan 24, 2010 11:24 am ] |
Post subject: | Re: FP Belt Drive Converstoin Questions |
I plan to use my Futaba 7 radio set that has heli programing. I think that you need a heli programable radio set. Vince |
Page 1 of 1 | All times are UTC + 8 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |